10-bit grayscale graphics output - How to setup a system?

1
Dear all,

I would like to setup a system with a graphic output of 10 bit grayscale. Appreciated would be a setup with one control screen (Dell P2212H LCD, resolution 1920x1080) and one stimulus presentation screen (AOC Spectrum CRT, resolution 4:3, e.g., 1600x1200). What would be the way to go?

As I understood from http://psychtoolbox.org/FAQ10BitFrameBufferResolution, Linux supports PTB for 10-bit grayscale via VGA and CRT screen, right?

Our hardware is a Dell Precision T3600 computer with an ATI FirePro V4900 graphics card (2x DP, 1 DVI).

So far, I installed Ubuntu 12.04 LTS 64-bit, Matlab R2012a 64-bit, and the latest PTB toolbox.
For the graphics driver I used the Ubuntu "Install Additional Proprietary Driver" – Function. It installed fglrx-driver package 8.96.7. That´s at least, what the AMD Catalyst Control Center 2.14 tells. (There were two options, but the second one, the post-release version failed to install).

I have checked/installed:
- the OpenGL utility toolkit GLUT
- GStreamer
- libusb-1.0 USB low-level access library.
- libdc1394 Firewire video capture library.
- libraw1394 Firewire low-level access library.
- low-latency kernel

Right now, running the PTB DriftDemo, I get a PsychOSKDGetBeamposition error (reported here: http://tech.groups.yahoo.com/group/psychtoolbox/message/14200) if I connect the LCD via DP-DVI connecto, and the CRT via DVI-VGA-connector. Having only the CRT connected I don´t get such an error.

What would be the recipe how to proceed now, to get actually a 10 bit output?

Thank you for your help!

Best, Simon
2
You need to enable the 10 bit mode somewhere in the Catalyst Control Center, and then see if it does provide 10 bit output over VGA or not. Psychtoolbox itself can enable this on older cards even if it is not officially supported, but not yet on the latest generation cards. It currently can't do its trick on Radeon HD-5000 or later and equivalent FireGL cards, e.g., your card is too new. Either it works with the official method, or it doesn't work.

As another data point, the recent NVidia binary drivers on Linux advertise support for 10 bit output to VGA and to suitable DisplayPort devices on the GeForce-8 series and later. I've tested this quickly with a GeForce-8800, driver version 295.40 (or was it 295.70?) and a VGA connected CRT monitor (with DVI to VGA adapater).

I haven't tested with photometer, but the BitsPlusCSFDemo shows a visually very noticable difference (steps in 8 bit mode, smooth gradients in 10 bit mode) if one chooses the gradient test chart and no gamma correction:

BitsPlusCSFDemo([], 1.0, 1, 1);

One needs to enable this mode in the NVidia control GUI. In the past they only enabled this for their professional class Quadro GPUs, but now apparently also on the consumer class GeForce GPUs.

-mario

--- In psychtoolbox@yahoogroups.com, "Alan Robinson" <meetup@...> wrote:
>
> Before you worry about that too much, I'd try to verify that you are
> actually getting a 10 bit frame buffer. The FAQ discusses how.
>
> -----Original Message-----
> From: ptbuser [mailto:ptbuser@...]
> Sent: Thursday, July 19, 2012 2:35 AM
> To: psychtoolbox@yahoogroups.com
> Subject: [psychtoolbox] 10-bit grayscale graphics output - How to setup a
> system?
>
> Dear all,
>
> I would like to setup a system with a graphic output of 10 bit grayscale.
> Appreciated would be a setup with one control screen (Dell P2212H LCD,
> resolution 1920x1080) and one stimulus presentation screen (AOC Spectrum
> CRT, resolution 4:3, e.g., 1600x1200). What would be the way to go?
>
> As I understood from http://psychtoolbox.org/FAQ10BitFrameBufferResolution,
> Linux supports PTB for 10-bit grayscale via VGA and CRT screen, right?
>
> Our hardware is a Dell Precision T3600 computer with an ATI FirePro V4900
> graphics card (2x DP, 1 DVI).
>
> So far, I installed Ubuntu 12.04 LTS 64-bit, Matlab R2012a 64-bit, and the
> latest PTB toolbox.
> For the graphics driver I used the Ubuntu "Install Additional Proprietary
> Driver" – Function. It installed fglrx-driver package 8.96.7. That´s at
> least, what the AMD Catalyst Control Center 2.14 tells. (There were two
> options, but the second one, the post-release version failed to install).
>
> I have checked/installed:
> - the OpenGL utility toolkit GLUT
> - GStreamer
> - libusb-1.0 USB low-level access library.
> - libdc1394 Firewire video capture library.
> - libraw1394 Firewire low-level access library.
> - low-latency kernel
>
> Right now, running the PTB DriftDemo, I get a PsychOSKDGetBeamposition error
> (reported here:
> http://tech.groups.yahoo.com/group/psychtoolbox/message/14200) if I connect
> the LCD via DP-DVI connecto, and the CRT via DVI-VGA-connector. Having only
> the CRT connected I don´t get such an error.
>
> What would be the recipe how to proceed now, to get actually a 10 bit
> output?
>
> Thank you for your help!
>
> Best, Simon
>
>
>
>
> ------------------------------------
>
> Post your message to: psychtoolbox@yahoogroups.com Please indicate OS9, OSX,
> or WIN version, and include your full name.
> Denis Pelli, David Brainard, and Allen Ingling.
> http://psychtoolbox.org
> Yahoo! Groups Links
>
3
Hi Mario and Alan, hi community!

Thanks a lot! I am a Linux beginner, but the Xorg.0.log looks like there is a wrong setting, or how would you interpret these lines (complete log attached below):
14.236] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 14.236] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)

....

14.565] (II) fglrx(0): Added pixel format for Deep Bit Depth functionality.
[ 14.565] (II) fglrx(0): ShadowFB mode is enabled for Deep Bit Depth functionality.
?


Probably, I will have a try with the Geforce 8800 GT, after the card has arrived.

Best, Simon


***************************************************************
Xorg.0.log
***************************************************************
[ 13.925]
X.Org X Server 1.11.3
Release Date: 2011-12-16
[ 13.925] X Protocol Version 11, Revision 0
[ 13.925] Build Operating System: Linux 2.6.42-26-generic x86_64 Ubuntu
[ 13.925] Current Operating System: Linux ABC-ABC 3.2.0-27-generic #43-Ubuntu SMP Fri Jul 6 14:25:57 UTC 2012 x86_64
[ 13.925] Kernel command line: BOOT_IMAGE=/boot/vmlinuz-3.2.0-27-generic root=UUID=0e1bf192-19b4-4a08-a4e1-3c2207bc7331 ro quiet splash vt.handoff=7
[ 13.925] Build Date: 16 July 2012 08:06:31PM
[ 13.925] xorg-server 2:1.11.4-0ubuntu10.6 (For technical support please see http://www.ubuntu.com/support)
[ 13.925] Current version of pixman: 0.24.4
[ 13.925] Before reporting problems, check http://wiki.x.org
to make sure that you have the latest version.
[ 13.925] Markers: (--) probed, (**) from config file, (==) default setting,
(++) from command line, (!!) notice, (II) informational,
(WW) warning, (EE) error, (NI) not implemented, (??) unknown.
[ 13.925] (==) Log file: "/var/log/Xorg.0.log", Time: Thu Aug 9 11:32:22 2012
[ 13.941] (==) Using config file: "/etc/X11/xorg.conf"
[ 13.941] (==) Using system config directory "/usr/share/X11/xorg.conf.d"
[ 14.026] (==) ServerLayout "amdcccle Layout"
[ 14.026] (**) |-->Screen "amdcccle-Screen[5]-0" (0)
[ 14.026] (**) | |-->Monitor "<default monitor>"
[ 14.032] (**) | |-->Device "amdcccle-Device[5]-0"
[ 14.032] (==) No monitor specified for screen "amdcccle-Screen[5]-0".
Using a default monitor configuration.
[ 14.032] (**) |-->Screen "amdcccle-Screen[5]-1" (1)
[ 14.032] (**) | |-->Monitor "<default monitor>"
[ 14.032] (**) | |-->Device "amdcccle-Device[5]-1"
[ 14.032] (==) No monitor specified for screen "amdcccle-Screen[5]-1".
Using a default monitor configuration.
[ 14.032] (==) Automatically adding devices
[ 14.032] (==) Automatically enabling devices
[ 14.032] (WW) The directory "/usr/share/fonts/X11/cyrillic" does not exist.
[ 14.032] Entry deleted from font path.
[ 14.032] (WW) The directory "/usr/share/fonts/X11/100dpi/" does not exist.
[ 14.032] Entry deleted from font path.
[ 14.032] (WW) The directory "/usr/share/fonts/X11/75dpi/" does not exist.
[ 14.032] Entry deleted from font path.
[ 14.032] (WW) The directory "/usr/share/fonts/X11/100dpi" does not exist.
[ 14.032] Entry deleted from font path.
[ 14.032] (WW) The directory "/usr/share/fonts/X11/75dpi" does not exist.
[ 14.032] Entry deleted from font path.
[ 14.032] (WW) The directory "/var/lib/defoma/x-ttcidfont-conf.d/dirs/TrueType" does not exist.
[ 14.032] Entry deleted from font path.
[ 14.032] (==) FontPath set to:
/usr/share/fonts/X11/misc,
/usr/share/fonts/X11/Type1,
built-ins
[ 14.032] (==) ModulePath set to "/usr/lib/x86_64-linux-gnu/xorg/extra-modules,/usr/lib/xorg/extra-modules,/usr/lib/xorg/modules"
[ 14.032] (II) The server relies on udev to provide the list of input devices.
If no devices become available, reconfigure udev or disable AutoAddDevices.
[ 14.032] (II) Loader magic: 0x7f91a8a97b00
[ 14.032] (II) Module ABI versions:
[ 14.032] X.Org ANSI C Emulation: 0.4
[ 14.032] X.Org Video Driver: 11.0
[ 14.032] X.Org XInput driver : 16.0
[ 14.032] X.Org Server Extension : 6.0
[ 14.033] (--) PCI:*(0:5:0:0) 1002:6749:1028:240a rev 0, Mem @ 0xe0000000/268435456, 0xfbd20000/131072, I/O @ 0x0000e000/256, BIOS @ 0x????????/131072
[ 14.033] (II) Open ACPI successful (/var/run/acpid.socket)
[ 14.033] (II) "extmod" will be loaded by default.
[ 14.033] (II) "dbe" will be loaded by default.
[ 14.033] (II) "glx" will be loaded. This was enabled by default and also specified in the config file.
[ 14.033] (II) "record" will be loaded by default.
[ 14.033] (II) "dri" will be loaded by default.
[ 14.033] (II) "dri2" will be loaded by default.
[ 14.033] (II) LoadModule: "glx"
[ 14.042] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/extensions/libglx.so
[ 14.058] (II) Module glx: vendor="Advanced Micro Devices, Inc."
[ 14.058] compiled for 6.9.0, module version = 1.0.0
[ 14.058] (II) Loading extension GLX
[ 14.058] (II) LoadModule: "extmod"
[ 14.077] (II) Loading /usr/lib/xorg/modules/extensions/libextmod.so
[ 14.155] (II) Module extmod: vendor="X.Org Foundation"
[ 14.155] compiled for 1.11.3, module version = 1.0.0
[ 14.155] Module class: X.Org Server Extension
[ 14.155] ABI class: X.Org Server Extension, version 6.0
[ 14.155] (II) Loading extension MIT-SCREEN-SAVER
[ 14.155] (II) Loading extension XFree86-VidModeExtension
[ 14.155] (II) Loading extension XFree86-DGA
[ 14.155] (II) Loading extension DPMS
[ 14.155] (II) Loading extension XVideo
[ 14.155] (II) Loading extension XVideo-MotionCompensation
[ 14.155] (II) Loading extension X-Resource
[ 14.155] (II) LoadModule: "dbe"
[ 14.155] (II) Loading /usr/lib/xorg/modules/extensions/libdbe.so
[ 14.156] (II) Module dbe: vendor="X.Org Foundation"
[ 14.156] compiled for 1.11.3, module version = 1.0.0
[ 14.156] Module class: X.Org Server Extension
[ 14.156] ABI class: X.Org Server Extension, version 6.0
[ 14.156] (II) Loading extension DOUBLE-BUFFER
[ 14.156] (II) LoadModule: "record"
[ 14.156] (II) Loading /usr/lib/xorg/modules/extensions/librecord.so
[ 14.156] (II) Module record: vendor="X.Org Foundation"
[ 14.156] compiled for 1.11.3, module version = 1.13.0
[ 14.156] Module class: X.Org Server Extension
[ 14.156] ABI class: X.Org Server Extension, version 6.0
[ 14.156] (II) Loading extension RECORD
[ 14.156] (II) LoadModule: "dri"
[ 14.156] (II) Loading /usr/lib/xorg/modules/extensions/libdri.so
[ 14.156] (II) Module dri: vendor="X.Org Foundation"
[ 14.156] compiled for 1.11.3, module version = 1.0.0
[ 14.156] ABI class: X.Org Server Extension, version 6.0
[ 14.156] (II) Loading extension XFree86-DRI
[ 14.156] (II) LoadModule: "dri2"
[ 14.156] (II) Loading /usr/lib/xorg/modules/extensions/libdri2.so
[ 14.156] (II) Module dri2: vendor="X.Org Foundation"
[ 14.156] compiled for 1.11.3, module version = 1.2.0
[ 14.156] ABI class: X.Org Server Extension, version 6.0
[ 14.156] (II) Loading extension DRI2
[ 14.156] (II) LoadModule: "fglrx"
[ 14.156] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/drivers/fglrx_drv.so
[ 14.165] (II) Module fglrx: vendor="FireGL - ATI Technologies Inc."
[ 14.165] compiled for 1.4.99.906, module version = 8.96.4
[ 14.165] Module class: X.Org Video Driver
[ 14.166] (II) Loading sub module "fglrxdrm"
[ 14.166] (II) LoadModule: "fglrxdrm"
[ 14.166] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/linux/libfglrxdrm.so
[ 14.166] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 14.166] compiled for 1.4.99.906, module version = 8.96.4
[ 14.204] (II) ATI Proprietary Linux Driver Version Identifier:8.96.4
[ 14.204] (II) ATI Proprietary Linux Driver Release Identifier: 8.96.7
[ 14.204] (II) ATI Proprietary Linux Driver Build Date: Mar 12 2012 13:06:50
[ 14.204] (++) using VT number 7

[ 14.204] (WW) Falling back to old probe method for fglrx
[ 14.208] (II) Loading PCS database from /etc/ati/amdpcsdb
[ 14.208] (--) Chipset Supported AMD Graphics Processor (0x6749) found
[ 14.208] (--) Chipset Supported AMD Graphics Processor (0x6749) found
[ 14.208] (WW) fglrx: No matching Device section for instance (BusID PCI:0@5:0:1) found
[ 14.210] (II) AMD Video driver is running on a device belonging to a group targeted for this release
[ 14.210] (II) AMD Video driver is signed
[ 14.211] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/drivers/fglrx_drv.so
[ 14.211] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/linux/libfglrxdrm.so
[ 14.211] (II) fglrx(0): pEnt->device->identifier=0x7f91a9cd71c0
[ 14.211] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/drivers/fglrx_drv.so
[ 14.211] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/linux/libfglrxdrm.so
[ 14.211] (II) fglrx(1): pEnt->device->identifier=0x7f91a9cd71c0
[ 14.211] (II) fglrx(0): === [xdl_xs111_atiddxPreInit] === begin
[ 14.211] (II) Loading sub module "vgahw"
[ 14.211] (II) LoadModule: "vgahw"
[ 14.236] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 14.236] (II) Module vgahw: vendor="X.Org Foundation"
[ 14.236] compiled for 1.11.3, module version = 0.1.0
[ 14.236] ABI class: X.Org Video Driver, version 11.0
[ 14.236] (**) fglrx(0): Depth 24, (--) framebuffer bpp 32
[ 14.236] (II) fglrx(0): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 14.236] (==) fglrx(0): Default visual is TrueColor
[ 14.236] (==) fglrx(0): RGB weight 888
[ 14.236] (II) fglrx(0): Using 8 bits per RGB
[ 14.236] (==) fglrx(0): Buffer Tiling is ON
[ 14.236] (II) Loading sub module "fglrxdrm"
[ 14.236] (II) LoadModule: "fglrxdrm"
[ 14.236] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/linux/libfglrxdrm.so
[ 14.236] (II) Module fglrxdrm: vendor="FireGL - ATI Technologies Inc."
[ 14.236] compiled for 1.4.99.906, module version = 8.96.4
[ 14.237] ukiDynamicMajor: found major device number 248
[ 14.237] ukiDynamicMajor: found major device number 248
[ 14.237] ukiOpenByBusid: Searching for BusID PCI:5:0:0
[ 14.237] ukiOpenDevice: node name is /dev/ati/card0
[ 14.237] ukiOpenDevice: open result is 13, (OK)
[ 14.237] ukiOpenByBusid: ukiOpenMinor returns 13
[ 14.237] ukiOpenByBusid: ukiGetBusid reports PCI:5:0:0
[ 14.237] (**) fglrx(0): NoAccel = NO
[ 14.237] (**) fglrx(0): ATI 2D Acceleration Architecture enabled
[ 14.237] (--) fglrx(0): Chipset: "ATI FirePro V (FireGL V) Graphics Adapter " (Chipset = 0x6749)
[ 14.237] (--) fglrx(0): (PciSubVendor = 0x1028, PciSubDevice = 0x240a)
[ 14.237] (==) fglrx(0): board vendor info: third party graphics adapter - NOT original ATI
[ 14.237] (--) fglrx(0): Linear framebuffer (phys) at 0xe0000000
[ 14.237] (--) fglrx(0): MMIO registers at 0xfbd20000
[ 14.237] (--) fglrx(0): I/O port at 0x0000e000
[ 14.237] (==) fglrx(0): ROM-BIOS at 0x000c0000
[ 14.237] (II) fglrx(0): AC Adapter is used
[ 14.240] (II) fglrx(0): Primary V_BIOS segment is: 0xc000
[ 14.241] (II) Loading sub module "vbe"
[ 14.241] (II) LoadModule: "vbe"
[ 14.241] (II) Loading /usr/lib/xorg/modules/libvbe.so
[ 14.241] (II) Module vbe: vendor="X.Org Foundation"
[ 14.241] compiled for 1.11.3, module version = 1.1.0
[ 14.241] ABI class: X.Org Video Driver, version 11.0
[ 14.241] (II) fglrx(0): VESA BIOS detected
[ 14.241] (II) fglrx(0): VESA VBE Version 3.0
[ 14.241] (II) fglrx(0): VESA VBE Total Mem: 16384 kB
[ 14.241] (II) fglrx(0): VESA VBE OEM: AMD ATOMBIOS
[ 14.241] (II) fglrx(0): VESA VBE OEM Software Rev: 13.12
[ 14.241] (II) fglrx(0): VESA VBE OEM Vendor: (C) 1988-2010, AMD Technologies Inc.
[ 14.241] (II) fglrx(0): VESA VBE OEM Product: FGL TURKS
[ 14.241] (II) fglrx(0): VESA VBE OEM Product Rev: 01.00
[ 14.274] (II) fglrx(0): ATI Video BIOS revision 9 or later detected
[ 14.274] (--) fglrx(0): Video RAM: 1048576 kByte, Type: GDDR5
[ 14.274] (II) fglrx(0): PCIE card detected
[ 14.274] (--) fglrx(0): Using per-process page tables (PPPT) as GART.
[ 14.274] (WW) fglrx(0): board is an unknown third party board, chipset is supported
[ 14.278] (II) fglrx(0): Using adapter: 5:0.0.
[ 14.307] (II) fglrx(0): [FB] MC range(MCFBBase = 0xf00000000, MCFBSize = 0x40000000)
[ 14.342] (II) fglrx(0): Interrupt handler installed at IRQ 85.
[ 14.342] (II) fglrx(0): RandR 1.2 support is enabled!
[ 14.342] (II) fglrx(0): RandR 1.2 rotation support is enabled!
[ 14.342] (==) fglrx(0): Center Mode is disabled
[ 14.342] (II) Loading sub module "fb"
[ 14.342] (II) LoadModule: "fb"
[ 14.342] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 14.342] (II) Module fb: vendor="X.Org Foundation"
[ 14.342] compiled for 1.11.3, module version = 1.0.0
[ 14.342] ABI class: X.Org ANSI C Emulation, version 0.4
[ 14.342] (II) Loading sub module "ddc"
[ 14.342] (II) LoadModule: "ddc"
[ 14.342] (II) Module "ddc" already built-in
[ 14.563] (II) fglrx(0): Finished Initialize PPLIB!
[ 14.564] (II) fglrx(0): Output DFP1 using monitor section 0-DFP1
[ 14.564] (**) fglrx(0): Option "PreferredMode" "1920x1080"
[ 14.564] (**) fglrx(0): Option "Position" "0 0"
[ 14.564] (**) fglrx(0): Option "Disable" "false"
[ 14.564] (**) fglrx(0): Option "Rotate" "normal"
[ 14.564] (**) fglrx(0): Option "TargetRefresh" "60"
[ 14.564] (II) fglrx(0): Output DFP2 has no monitor section
[ 14.564] (II) fglrx(0): Output DFP3 has no monitor section
[ 14.564] (II) fglrx(0): Output DFP4 has no monitor section
[ 14.564] (II) fglrx(0): Output DFP5 has no monitor section
[ 14.564] (II) fglrx(0): Output DFP6 has no monitor section
[ 14.564] (II) fglrx(0): Output DFP7 has no monitor section
[ 14.564] (II) fglrx(0): Output DFP8 has no monitor section
[ 14.564] (II) fglrx(0): Output DFP9 has no monitor section
[ 14.564] (II) fglrx(0): Output CRT1 has no monitor section
[ 14.564] (II) Loading sub module "ddc"
[ 14.564] (II) LoadModule: "ddc"
[ 14.564] (II) Module "ddc" already built-in
[ 14.564] (II) fglrx(0): Connected Display0: DFP1
[ 14.564] (II) fglrx(0): Display0 EDID data ---------------------------
[ 14.564] (II) fglrx(0): Manufacturer: DEL Model: a07f Serial#: 810041677
[ 14.564] (II) fglrx(0): Year: 2012 Week: 16
[ 14.564] (II) fglrx(0): EDID Version: 1.3
[ 14.564] (II) fglrx(0): Digital Display Input
[ 14.564] (II) fglrx(0): Max Image Size [cm]: horiz.: 48 vert.: 27
[ 14.564] (II) fglrx(0): Gamma: 2.20
[ 14.564] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[ 14.564] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 14.564] (II) fglrx(0): First detailed timing is preferred mode
[ 14.564] (II) fglrx(0): redX: 0.637 redY: 0.351 greenX: 0.319 greenY: 0.626
[ 14.564] (II) fglrx(0): blueX: 0.145 blueY: 0.061 whiteX: 0.313 whiteY: 0.329
[ 14.564] (II) fglrx(0): Supported established timings:
[ 14.564] (II) fglrx(0): 720x400@70Hz
[ 14.564] (II) fglrx(0): 640x480@60Hz
[ 14.564] (II) fglrx(0): 640x480@75Hz
[ 14.564] (II) fglrx(0): 800x600@60Hz
[ 14.564] (II) fglrx(0): 800x600@75Hz
[ 14.564] (II) fglrx(0): 1024x768@60Hz
[ 14.564] (II) fglrx(0): 1024x768@75Hz
[ 14.564] (II) fglrx(0): 1280x1024@75Hz
[ 14.564] (II) fglrx(0): Manufacturer's mask: 0
[ 14.564] (II) fglrx(0): Supported standard timings:
[ 14.564] (II) fglrx(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 14.564] (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 14.564] (II) fglrx(0): #2: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 14.564] (II) fglrx(0): Supported detailed timing:
[ 14.564] (II) fglrx(0): clock: 148.5 MHz Image Size: 531 x 299 mm
[ 14.564] (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 14.564] (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 14.564] (II) fglrx(0): Serial No: V0VCM24G0HAM
[ 14.564] (II) fglrx(0): Monitor name: DELL P2212H
[ 14.564] (II) fglrx(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[ 14.564] (II) fglrx(0): EDID (in hex):
[ 14.564] (II) fglrx(0): 00ffffffffffff0010ac7fa04d414830
[ 14.564] (II) fglrx(0): 1016010380301b78ea3d25a35951a025
[ 14.564] (II) fglrx(0): 0f5054a54b00714f8180d1c001010101
[ 14.564] (II) fglrx(0): 010101010101023a801871382d40582c
[ 14.564] (II) fglrx(0): 4500132b2100001e000000ff00563056
[ 14.564] (II) fglrx(0): 434d3234473048414d0a000000fc0044
[ 14.564] (II) fglrx(0): 454c4c205032323132480a20000000fd
[ 14.564] (II) fglrx(0): 00384c1e5311000a2020202020200070
[ 14.564] (II) fglrx(0): End of Display0 EDID data --------------------
[ 14.564] (II) fglrx(0): Connected Display1: CRT1
[ 14.564] (II) fglrx(0): Display1 EDID data ---------------------------
[ 14.564] (II) fglrx(0): Manufacturer: AOC Model: a995 Serial#: 606411
[ 14.564] (II) fglrx(0): Year: 2002 Week: 52
[ 14.564] (II) fglrx(0): EDID Version: 1.2
[ 14.564] (II) fglrx(0): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 14.564] (II) fglrx(0): Sync: Separate
[ 14.564] (II) fglrx(0): Max Image Size [cm]: horiz.: 36 vert.: 27
[ 14.564] (II) fglrx(0): Gamma: 2.20
[ 14.564] (II) fglrx(0): DPMS capabilities: Off; RGB/Color Display
[ 14.564] (II) fglrx(0): First detailed timing is preferred mode
[ 14.564] (II) fglrx(0): redX: 0.626 redY: 0.340 greenX: 0.288 greenY: 0.608
[ 14.564] (II) fglrx(0): blueX: 0.148 blueY: 0.064 whiteX: 0.283 whiteY: 0.298
[ 14.564] (II) fglrx(0): Supported established timings:
[ 14.564] (II) fglrx(0): 720x400@70Hz
[ 14.564] (II) fglrx(0): 640x480@60Hz
[ 14.564] (II) fglrx(0): 640x480@75Hz
[ 14.564] (II) fglrx(0): 800x600@75Hz
[ 14.564] (II) fglrx(0): 1024x768@75Hz
[ 14.564] (II) fglrx(0): 1280x1024@75Hz
[ 14.564] (II) fglrx(0): Manufacturer's mask: 0
[ 14.564] (II) fglrx(0): Supported standard timings:
[ 14.564] (II) fglrx(0): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
[ 14.564] (II) fglrx(0): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
[ 14.564] (II) fglrx(0): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
[ 14.564] (II) fglrx(0): #3: hsize: 1280 vsize 960 refresh: 85 vid: 22913
[ 14.564] (II) fglrx(0): #4: hsize: 1280 vsize 1024 refresh: 85 vid: 39297
[ 14.564] (II) fglrx(0): #5: hsize: 1600 vsize 1200 refresh: 75 vid: 20393
[ 14.564] (II) fglrx(0): Supported detailed timing:
[ 14.564] (II) fglrx(0): clock: 157.5 MHz Image Size: 360 x 270 mm
[ 14.564] (II) fglrx(0): h_active: 1280 h_sync: 1344 h_sync_end 1504 h_blank_end 1728 h_border: 0
[ 14.564] (II) fglrx(0): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1072 v_border: 0
[ 14.564] (II) fglrx(0): Monitor name: AOC Spectrum
[ 14.564] (II) fglrx(0): Monitor name: 9G
[ 14.564] (II) fglrx(0): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 95 kHz, PixClock max 205 MHz
[ 14.564] (II) fglrx(0): EDID (in hex):
[ 14.564] (II) fglrx(0): 00ffffffffffff0005e395a9cb400900
[ 14.564] (II) fglrx(0): 340c010268241b782a4f29a057499b26
[ 14.564] (II) fglrx(0): 10484ca4430031594559615981598199
[ 14.564] (II) fglrx(0): a94f01010101863d00c05100304040a0
[ 14.564] (II) fglrx(0): 1300680e1100001e000000fc00414f43
[ 14.564] (II) fglrx(0): 20537065637472756d20000000fc0039
[ 14.564] (II) fglrx(0): 470a20202020202020202020000000fd
[ 14.564] (II) fglrx(0): 0032a01e5f14000a202020202020003c
[ 14.564] (II) fglrx(0): End of Display1 EDID data --------------------
[ 14.565] (II) fglrx(0): EDID for output DFP1
[ 14.565] (II) fglrx(0): Manufacturer: DEL Model: a07f Serial#: 810041677
[ 14.565] (II) fglrx(0): Year: 2012 Week: 16
[ 14.565] (II) fglrx(0): EDID Version: 1.3
[ 14.565] (II) fglrx(0): Digital Display Input
[ 14.565] (II) fglrx(0): Max Image Size [cm]: horiz.: 48 vert.: 27
[ 14.565] (II) fglrx(0): Gamma: 2.20
[ 14.565] (II) fglrx(0): DPMS capabilities: StandBy Suspend Off
[ 14.565] (II) fglrx(0): Supported color encodings: RGB 4:4:4 YCrCb 4:4:4
[ 14.565] (II) fglrx(0): First detailed timing is preferred mode
[ 14.565] (II) fglrx(0): redX: 0.637 redY: 0.351 greenX: 0.319 greenY: 0.626
[ 14.565] (II) fglrx(0): blueX: 0.145 blueY: 0.061 whiteX: 0.313 whiteY: 0.329
[ 14.565] (II) fglrx(0): Supported established timings:
[ 14.565] (II) fglrx(0): 720x400@70Hz
[ 14.565] (II) fglrx(0): 640x480@60Hz
[ 14.565] (II) fglrx(0): 640x480@75Hz
[ 14.565] (II) fglrx(0): 800x600@60Hz
[ 14.565] (II) fglrx(0): 800x600@75Hz
[ 14.565] (II) fglrx(0): 1024x768@60Hz
[ 14.565] (II) fglrx(0): 1024x768@75Hz
[ 14.565] (II) fglrx(0): 1280x1024@75Hz
[ 14.565] (II) fglrx(0): Manufacturer's mask: 0
[ 14.565] (II) fglrx(0): Supported standard timings:
[ 14.565] (II) fglrx(0): #0: hsize: 1152 vsize 864 refresh: 75 vid: 20337
[ 14.565] (II) fglrx(0): #1: hsize: 1280 vsize 1024 refresh: 60 vid: 32897
[ 14.565] (II) fglrx(0): #2: hsize: 1920 vsize 1080 refresh: 60 vid: 49361
[ 14.565] (II) fglrx(0): Supported detailed timing:
[ 14.565] (II) fglrx(0): clock: 148.5 MHz Image Size: 531 x 299 mm
[ 14.565] (II) fglrx(0): h_active: 1920 h_sync: 2008 h_sync_end 2052 h_blank_end 2200 h_border: 0
[ 14.565] (II) fglrx(0): v_active: 1080 v_sync: 1084 v_sync_end 1089 v_blanking: 1125 v_border: 0
[ 14.565] (II) fglrx(0): Serial No: V0VCM24G0HAM
[ 14.565] (II) fglrx(0): Monitor name: DELL P2212H
[ 14.565] (II) fglrx(0): Ranges: V min: 56 V max: 76 Hz, H min: 30 H max: 83 kHz, PixClock max 175 MHz
[ 14.565] (II) fglrx(0): EDID (in hex):
[ 14.565] (II) fglrx(0): 00ffffffffffff0010ac7fa04d414830
[ 14.565] (II) fglrx(0): 1016010380301b78ea3d25a35951a025
[ 14.565] (II) fglrx(0): 0f5054a54b00714f8180d1c001010101
[ 14.565] (II) fglrx(0): 010101010101023a801871382d40582c
[ 14.565] (II) fglrx(0): 4500132b2100001e000000ff00563056
[ 14.565] (II) fglrx(0): 434d3234473048414d0a000000fc0044
[ 14.565] (II) fglrx(0): 454c4c205032323132480a20000000fd
[ 14.565] (II) fglrx(0): 00384c1e5311000a2020202020200070
[ 14.565] (II) fglrx(0): EDID vendor "DEL", prod id 41087
[ 14.565] (II) fglrx(0): Using EDID range info for horizontal sync
[ 14.565] (II) fglrx(0): Using EDID range info for vertical refresh
[ 14.565] (II) fglrx(0): Printing DDC gathered Modelines:
[ 14.565] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 14.565] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 14.565] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 14.565] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 14.565] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 14.565] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 14.565] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 14.565] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 14.565] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 14.565] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 14.565] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 14.565] (II) fglrx(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[ 14.565] (II) fglrx(0): Printing probed modes for output DFP1
[ 14.565] (II) fglrx(0): Modeline "1920x1080"x60.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 14.565] (II) fglrx(0): Modeline "1680x1050"x60.0 148.50 1680 2008 2052 2200 1050 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 14.565] (II) fglrx(0): Modeline "1400x1050"x60.0 148.50 1400 2008 2052 2200 1050 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 14.565] (II) fglrx(0): Modeline "1600x900"x60.0 148.50 1600 2008 2052 2200 900 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 14.565] (II) fglrx(0): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 14.565] (II) fglrx(0): Modeline "1280x1024"x60.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 14.565] (II) fglrx(0): Modeline "1440x900"x60.0 148.50 1440 2008 2052 2200 900 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 14.565] (II) fglrx(0): Modeline "1280x960"x75.0 135.00 1280 1296 1440 1688 960 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 14.565] (II) fglrx(0): Modeline "1280x960"x60.0 108.00 1280 1328 1440 1688 960 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 14.565] (II) fglrx(0): Modeline "1152x864"x60.0 148.50 1152 2008 2052 2200 864 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 14.565] (II) fglrx(0): Modeline "1152x864"x75.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 14.565] (II) fglrx(0): Modeline "1280x768"x75.0 135.00 1280 1296 1440 1688 768 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 14.565] (II) fglrx(0): Modeline "1280x768"x60.0 108.00 1280 1328 1440 1688 768 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 14.565] (II) fglrx(0): Modeline "1280x720"x75.0 135.00 1280 1296 1440 1688 720 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 14.565] (II) fglrx(0): Modeline "1280x720"x60.0 108.00 1280 1328 1440 1688 720 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 14.565] (II) fglrx(0): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 14.565] (II) fglrx(0): Modeline "1024x768"x60.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 14.565] (II) fglrx(0): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 14.565] (II) fglrx(0): Modeline "800x600"x60.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 14.565] (II) fglrx(0): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 14.565] (II) fglrx(0): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 14.565] (II) fglrx(0): EDID for output DFP2
[ 14.565] (II) fglrx(0): EDID for output DFP3
[ 14.565] (II) fglrx(0): EDID for output DFP4
[ 14.565] (II) fglrx(0): EDID for output DFP5
[ 14.565] (II) fglrx(0): EDID for output DFP6
[ 14.565] (II) fglrx(0): EDID for output DFP7
[ 14.565] (II) fglrx(0): EDID for output DFP8
[ 14.565] (II) fglrx(0): EDID for output DFP9
[ 14.565] (II) fglrx(0): EDID for output CRT1
[ 14.565] (II) fglrx(0): Output DFP1 connected
[ 14.565] (II) fglrx(0): Output DFP2 disconnected
[ 14.565] (II) fglrx(0): Output DFP3 disconnected
[ 14.565] (II) fglrx(0): Output DFP4 disconnected
[ 14.565] (II) fglrx(0): Output DFP5 disconnected
[ 14.565] (II) fglrx(0): Output DFP6 disconnected
[ 14.565] (II) fglrx(0): Output DFP7 disconnected
[ 14.565] (II) fglrx(0): Output DFP8 disconnected
[ 14.565] (II) fglrx(0): Output DFP9 disconnected
[ 14.565] (II) fglrx(0): Output CRT1 disconnected
[ 14.565] (II) fglrx(0): Using user preference for initial modes
[ 14.565] (II) fglrx(0): Output DFP1 using initial mode 1920x1080
[ 14.565] (II) fglrx(0): Display dimensions: (480, 270) mm
[ 14.565] (II) fglrx(0): DPI set to (101, 101)
[ 14.565] (II) fglrx(0): Added pixel format for Deep Bit Depth functionality.
[ 14.565] (II) fglrx(0): ShadowFB mode is enabled for Deep Bit Depth functionality.
[ 14.565] (II) fglrx(0): Eyefinity capable adapter detected.
[ 14.565] (II) fglrx(0): Adapter ATI FirePro V (FireGL V) Graphics Adapter has 6 configurable heads and 2 displays connected.
[ 14.565] (==) fglrx(0): PseudoColor visuals disabled
[ 14.565] (II) Loading sub module "ramdac"
[ 14.565] (II) LoadModule: "ramdac"
[ 14.565] (II) Module "ramdac" already built-in
[ 14.565] (==) fglrx(0): NoDRI = NO
[ 14.565] (==) fglrx(0): Capabilities: 0x00000000
[ 14.565] (==) fglrx(0): CapabilitiesEx: 0x00000000
[ 14.565] (==) fglrx(0): OpenGL ClientDriverName: "fglrx_dri.so"
[ 14.565] (==) fglrx(0): UseFastTLS=0
[ 14.565] (==) fglrx(0): BlockSignalsOnLock=1
[ 14.565] (II) fglrx(1): === [xdl_xs111_atiddxPreInit] === begin
[ 14.566] (II) Loading sub module "vgahw"
[ 14.566] (II) LoadModule: "vgahw"
[ 14.566] (II) Loading /usr/lib/xorg/modules/libvgahw.so
[ 14.566] (II) Module vgahw: vendor="X.Org Foundation"
[ 14.566] compiled for 1.11.3, module version = 0.1.0
[ 14.566] ABI class: X.Org Video Driver, version 11.0
[ 14.566] (**) fglrx(1): Depth 24, (--) framebuffer bpp 32
[ 14.566] (II) fglrx(1): Pixel depth = 24 bits stored in 4 bytes (32 bpp pixmaps)
[ 14.566] (==) fglrx(1): Default visual is TrueColor
[ 14.566] (==) fglrx(1): RGB weight 888
[ 14.566] (II) fglrx(1): Using 8 bits per RGB
[ 14.566] (==) fglrx(1): Buffer Tiling is ON (copy from primary)
[ 14.566] (==) fglrx(1): NoAccel = NO (copy from primary screen)
[ 14.566] (**) fglrx(1): ATI 2D Acceleration Architecture enabled
[ 14.566] (II) Loading sub module "fb"
[ 14.566] (II) LoadModule: "fb"
[ 14.566] (II) Loading /usr/lib/xorg/modules/libfb.so
[ 14.566] (II) Module fb: vendor="X.Org Foundation"
[ 14.566] compiled for 1.11.3, module version = 1.0.0
[ 14.566] ABI class: X.Org ANSI C Emulation, version 0.4
[ 14.566] (II) Loading sub module "ddc"
[ 14.566] (II) LoadModule: "ddc"
[ 14.566] (II) Module "ddc" already built-in
[ 14.566] (II) fglrx(1): Output DFP1 has no monitor section
[ 14.566] (II) fglrx(1): Output DFP2 has no monitor section
[ 14.566] (II) fglrx(1): Output DFP3 has no monitor section
[ 14.566] (II) fglrx(1): Output DFP4 has no monitor section
[ 14.566] (II) fglrx(1): Output DFP5 has no monitor section
[ 14.566] (II) fglrx(1): Output DFP6 has no monitor section
[ 14.566] (II) fglrx(1): Output DFP7 has no monitor section
[ 14.566] (II) fglrx(1): Output DFP8 has no monitor section
[ 14.566] (II) fglrx(1): Output DFP9 has no monitor section
[ 14.566] (II) fglrx(1): Output CRT1 using monitor section 0-CRT1
[ 14.566] (**) fglrx(1): Option "PreferredMode" "1280x1024"
[ 14.566] (**) fglrx(1): Option "Position" "0 0"
[ 14.566] (**) fglrx(1): Option "Disable" "false"
[ 14.566] (**) fglrx(1): Option "Rotate" "normal"
[ 14.566] (**) fglrx(1): Option "TargetRefresh" "85"
[ 14.566] (II) fglrx(1): EDID for output DFP1
[ 14.566] (II) fglrx(1): EDID for output DFP2
[ 14.566] (II) fglrx(1): EDID for output DFP3
[ 14.566] (II) fglrx(1): EDID for output DFP4
[ 14.566] (II) fglrx(1): EDID for output DFP5
[ 14.566] (II) fglrx(1): EDID for output DFP6
[ 14.566] (II) fglrx(1): EDID for output DFP7
[ 14.566] (II) fglrx(1): EDID for output DFP8
[ 14.566] (II) fglrx(1): EDID for output DFP9
[ 14.566] (II) fglrx(1): EDID for output CRT1
[ 14.566] (II) fglrx(1): Manufacturer: AOC Model: a995 Serial#: 606411
[ 14.566] (II) fglrx(1): Year: 2002 Week: 52
[ 14.566] (II) fglrx(1): EDID Version: 1.2
[ 14.566] (II) fglrx(1): Analog Display Input, Input Voltage Level: 0.700/0.700 V
[ 14.566] (II) fglrx(1): Sync: Separate
[ 14.566] (II) fglrx(1): Max Image Size [cm]: horiz.: 36 vert.: 27
[ 14.566] (II) fglrx(1): Gamma: 2.20
[ 14.566] (II) fglrx(1): DPMS capabilities: Off; RGB/Color Display
[ 14.566] (II) fglrx(1): First detailed timing is preferred mode
[ 14.566] (II) fglrx(1): redX: 0.626 redY: 0.340 greenX: 0.288 greenY: 0.608
[ 14.566] (II) fglrx(1): blueX: 0.148 blueY: 0.064 whiteX: 0.283 whiteY: 0.298
[ 14.566] (II) fglrx(1): Supported established timings:
[ 14.566] (II) fglrx(1): 720x400@70Hz
[ 14.566] (II) fglrx(1): 640x480@60Hz
[ 14.566] (II) fglrx(1): 640x480@75Hz
[ 14.566] (II) fglrx(1): 800x600@75Hz
[ 14.566] (II) fglrx(1): 1024x768@75Hz
[ 14.566] (II) fglrx(1): 1280x1024@75Hz
[ 14.566] (II) fglrx(1): Manufacturer's mask: 0
[ 14.566] (II) fglrx(1): Supported standard timings:
[ 14.566] (II) fglrx(1): #0: hsize: 640 vsize 480 refresh: 85 vid: 22833
[ 14.566] (II) fglrx(1): #1: hsize: 800 vsize 600 refresh: 85 vid: 22853
[ 14.566] (II) fglrx(1): #2: hsize: 1024 vsize 768 refresh: 85 vid: 22881
[ 14.566] (II) fglrx(1): #3: hsize: 1280 vsize 960 refresh: 85 vid: 22913
[ 14.566] (II) fglrx(1): #4: hsize: 1280 vsize 1024 refresh: 85 vid: 39297
[ 14.566] (II) fglrx(1): #5: hsize: 1600 vsize 1200 refresh: 75 vid: 20393
[ 14.566] (II) fglrx(1): Supported detailed timing:
[ 14.566] (II) fglrx(1): clock: 157.5 MHz Image Size: 360 x 270 mm
[ 14.566] (II) fglrx(1): h_active: 1280 h_sync: 1344 h_sync_end 1504 h_blank_end 1728 h_border: 0
[ 14.566] (II) fglrx(1): v_active: 1024 v_sync: 1025 v_sync_end 1028 v_blanking: 1072 v_border: 0
[ 14.566] (II) fglrx(1): Monitor name: AOC Spectrum
[ 14.566] (II) fglrx(1): Monitor name: 9G
[ 14.566] (II) fglrx(1): Ranges: V min: 50 V max: 160 Hz, H min: 30 H max: 95 kHz, PixClock max 205 MHz
[ 14.566] (II) fglrx(1): EDID (in hex):
[ 14.566] (II) fglrx(1): 00ffffffffffff0005e395a9cb400900
[ 14.566] (II) fglrx(1): 340c010268241b782a4f29a057499b26
[ 14.566] (II) fglrx(1): 10484ca4430031594559615981598199
[ 14.566] (II) fglrx(1): a94f01010101863d00c05100304040a0
[ 14.566] (II) fglrx(1): 1300680e1100001e000000fc00414f43
[ 14.566] (II) fglrx(1): 20537065637472756d20000000fc0039
[ 14.566] (II) fglrx(1): 470a20202020202020202020000000fd
[ 14.566] (II) fglrx(1): 0032a01e5f14000a202020202020003c
[ 14.566] (II) fglrx(1): Printing probed modes for output CRT1
[ 14.566] (II) fglrx(1): Modeline "1280x1024"x85.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz)
[ 14.566] (II) fglrx(1): Modeline "1600x1200"x75.0 202.50 1600 1664 1856 2160 1200 1201 1204 1250 +hsync +vsync (93.8 kHz)
[ 14.566] (II) fglrx(1): Modeline "1400x1050"x75.0 202.50 1400 1664 1856 2160 1050 1201 1204 1250 +hsync +vsync (93.8 kHz)
[ 14.566] (II) fglrx(1): Modeline "1280x1024"x75.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 14.566] (II) fglrx(1): Modeline "1440x900"x75.0 202.50 1440 1664 1856 2160 900 1201 1204 1250 +hsync +vsync (93.8 kHz)
[ 14.566] (II) fglrx(1): Modeline "1280x960"x85.0 148.50 1280 1344 1504 1728 960 961 964 1011 +hsync +vsync (85.9 kHz)
[ 14.566] (II) fglrx(1): Modeline "1280x768"x85.0 148.50 1280 1344 1504 1728 768 961 964 1011 +hsync +vsync (85.9 kHz)
[ 14.566] (II) fglrx(1): Modeline "1280x720"x85.0 148.50 1280 1344 1504 1728 720 961 964 1011 +hsync +vsync (85.9 kHz)
[ 14.566] (II) fglrx(1): Modeline "1024x768"x85.0 94.50 1024 1072 1168 1376 768 769 772 808 +hsync +vsync (68.7 kHz)
[ 14.566] (II) fglrx(1): Modeline "1024x768"x75.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 14.566] (II) fglrx(1): Modeline "800x600"x85.0 56.25 800 832 896 1048 600 601 604 631 +hsync +vsync (53.7 kHz)
[ 14.566] (II) fglrx(1): Modeline "800x600"x75.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 14.566] (II) fglrx(1): Modeline "640x480"x85.0 36.00 640 696 752 832 480 481 484 509 -hsync -vsync (43.3 kHz)
[ 14.566] (II) fglrx(1): Modeline "640x480"x75.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 14.566] (II) fglrx(1): Modeline "640x480"x60.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 14.566] (II) fglrx(1): Output DFP1 disconnected
[ 14.566] (II) fglrx(1): Output DFP2 disconnected
[ 14.566] (II) fglrx(1): Output DFP3 disconnected
[ 14.566] (II) fglrx(1): Output DFP4 disconnected
[ 14.566] (II) fglrx(1): Output DFP5 disconnected
[ 14.566] (II) fglrx(1): Output DFP6 disconnected
[ 14.566] (II) fglrx(1): Output DFP7 disconnected
[ 14.566] (II) fglrx(1): Output DFP8 disconnected
[ 14.566] (II) fglrx(1): Output DFP9 disconnected
[ 14.566] (II) fglrx(1): Output CRT1 connected
[ 14.566] (II) fglrx(1): Using user preference for initial modes
[ 14.566] (II) fglrx(1): Output CRT1 using initial mode 1280x1024
[ 14.566] (II) fglrx(1): DPI set to (96, 96)
[ 14.566] (WW) fglrx(0): Unable to register ADL handler for 0x00110000
[ 14.566] (WW) fglrx(0): Unable to register ADL handler for 0x00120000
[ 14.566] (WW) fglrx(0): Unable to register ADL handler for 0x00130000
[ 14.566] (WW) fglrx(0): Unable to register ADL handler for 0x00150000
[ 14.566] (II) fglrx(1): Added pixel format for Deep Bit Depth functionality.
[ 14.566] (II) fglrx(1): ShadowFB mode is enabled for Deep Bit Depth functionality.
[ 14.566] (II) fglrx(1): Eyefinity capable adapter detected.
[ 14.567] (II) fglrx(1): Adapter ATI FirePro V (FireGL V) Graphics Adapter has 6 configurable heads and 2 displays connected.
[ 14.567] (==) fglrx(1): PseudoColor visuals disabled
[ 14.567] (==) fglrx(1): bNoDRI = NO (copy from primary screen)
[ 14.567] (==) fglrx(1): UseFastTLS=0
[ 14.567] (==) fglrx(1): BlockSignalsOnLock=1
[ 14.567] (--) Depth 24 pixmap format is 32 bpp
[ 14.572] (II) Loading extension ATIFGLRXDRI
[ 14.572] (II) fglrx(0): doing swlDriScreenInit
[ 14.572] (II) fglrx(0): swlDriScreenInit for fglrx driver
[ 14.572] ukiDynamicMajor: found major device number 248
[ 14.572] ukiDynamicMajor: found major device number 248
[ 14.572] ukiDynamicMajor: found major device number 248
[ 14.572] ukiOpenByBusid: Searching for BusID PCI:5:0:0
[ 14.572] ukiOpenDevice: node name is /dev/ati/card0
[ 14.572] ukiOpenDevice: open result is 18, (OK)
[ 14.572] ukiOpenByBusid: ukiOpenMinor returns 18
[ 14.572] ukiOpenByBusid: ukiGetBusid reports PCI:5:0:0
[ 14.572] (II) fglrx(0): [uki] DRM interface version 1.0
[ 14.572] (II) fglrx(0): [uki] created "fglrx" driver at busid "PCI:5:0:0"
[ 14.572] (II) fglrx(0): [uki] added 8192 byte SAREA at 0x2000
[ 14.572] (II) fglrx(0): [uki] mapped SAREA 0x2000 to 0x7f91a8699000
[ 14.572] (II) fglrx(0): [uki] framebuffer handle = 0x3000
[ 14.572] (II) fglrx(0): [uki] added 1 reserved context for kernel
[ 14.572] (II) fglrx(0): swlDriScreenInit done
[ 14.572] (II) fglrx(0): Kernel Module Version Information:
[ 14.572] (II) fglrx(0): Name: fglrx
[ 14.572] (II) fglrx(0): Version: 8.96.4
[ 14.572] (II) fglrx(0): Date: Mar 12 2012
[ 14.572] (II) fglrx(0): Desc: ATI FireGL DRM kernel module
[ 14.572] (II) fglrx(0): Kernel Module version matches driver.
[ 14.572] (II) fglrx(0): Kernel Module Build Time Information:
[ 14.572] (II) fglrx(0): Build-Kernel UTS_RELEASE: 3.2.0-27-generic
[ 14.572] (II) fglrx(0): Build-Kernel MODVERSIONS: no
[ 14.572] (II) fglrx(0): Build-Kernel __SMP__: yes
[ 14.572] (II) fglrx(0): Build-Kernel PAGE_SIZE: 0x1000
[ 14.573] (II) fglrx(0): [uki] register handle = 0x00004000
[ 14.573] (II) fglrx(0): FIREGL Board Found
[ 14.600] (II) fglrx(0): Static shadow buffer initialized.
[ 14.600] (II) fglrx(0): Shared DBD buffer allocated.
[ 14.601] (II) fglrx(0): DRI initialization successfull
[ 14.612] (II) fglrx(0): FBADPhys: 0xf00000000 FBMappedSize: 0x010e0000
[ 14.613] (==) fglrx(0): Backing store disabled
[ 14.613] (II) Loading extension FGLRXEXTENSION
[ 14.613] (==) fglrx(0): DPMS enabled
[ 14.613] (II) fglrx(0): Initialized in-driver Xinerama extension
[ 14.613] (**) fglrx(0): Textured Video is enabled.
[ 14.613] (II) LoadModule: "glesx"
[ 14.613] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/glesx.so
[ 14.613] (II) Module glesx: vendor="X.Org Foundation"
[ 14.613] compiled for 1.4.99.906, module version = 1.0.0
[ 14.613] (II) Loading extension GLESX
[ 14.613] (II) fglrx(0): GLESX enableFlags = 2896
[ 14.613] (II) fglrx(0): GLESX is enabled
[ 14.613] (II) LoadModule: "amdxmm"
[ 14.613] (II) Loading /usr/lib/x86_64-linux-gnu/xorg/extra-modules/extra-modules.dpkg-tmp/modules/amdxmm.so
[ 14.613] (II) Module amdxmm: vendor="X.Org Foundation"
[ 14.613] compiled for 1.4.99.906, module version = 2.0.0
[ 14.684] (II) Loading extension AMDXVOPL
[ 14.684] (II) Loading extension AMDXVBA
[ 14.685] (II) fglrx(0): UVD feature is enabled(II) fglrx(0):
[ 14.686] (II) fglrx(0): Enable composite support successfully
[ 14.686] (II) fglrx(0): X context handle = 0x1
[ 14.686] (II) fglrx(0): [DRI] installation complete
[ 14.687] (==) fglrx(0): Silken mouse enabled
[ 14.687] (==) fglrx(0): Using HW cursor of display infrastructure!
[ 14.687] (II) fglrx(0): Disabling in-server RandR and enabling in-driver RandR 1.2.
[ 14.696] (II) fglrx(0): User Preference Output DFP1 using refresh rate 60.0 Hz.
[ 14.738] (--) RandR disabled
[ 14.739] (II) fglrx(1): doing swlDriScreenInit
[ 14.739] (II) fglrx(1): swlDriScreenInit for fglrx driver
[ 14.739] ukiDynamicMajor: found major device number 248
[ 14.739] ukiDynamicMajor: found major device number 248
[ 14.739] ukiDynamicMajor: found major device number 248
[ 14.739] ukiOpenByBusid: Searching for BusID PCI:5:0:0
[ 14.739] ukiOpenDevice: node name is /dev/ati/card0
[ 14.739] ukiOpenDevice: open result is 19, (OK)
[ 14.739] ukiOpenByBusid: ukiOpenMinor returns 19
[ 14.739] ukiOpenByBusid: ukiGetBusid reports PCI:5:0:0
[ 14.739] (II) fglrx(1): [uki] DRM interface version 1.0
[ 14.739] (II) fglrx(1): [uki] created "fglrx" driver at busid "PCI:5:0:0"
[ 14.739] (II) fglrx(1): [uki] added 8192 byte SAREA at 0x2000
[ 14.739] (II) fglrx(1): [uki] mapped SAREA 0x2000 to 0x7f91a0075000
[ 14.739] (II) fglrx(1): [uki] framebuffer handle = 0x3000
[ 14.739] (II) fglrx(1): [uki] added 1 reserved context for kernel
[ 14.739] (II) fglrx(1): swlDriScreenInit done
[ 14.739] (II) fglrx(1): FIREGL Board Found
[ 14.749] (II) fglrx(1): Static shadow buffer initialized.
[ 14.749] (II) fglrx(1): Shared DBD buffer allocated.
[ 14.749] (II) fglrx(1): DRI initialization successfull
[ 14.749] (II) fglrx(1): FBADPhys: 0xf021f0000 FBMappedSize: 0x00a28000
[ 14.749] (==) fglrx(1): Backing store disabled
[ 14.749] (==) fglrx(1): DPMS enabled
[ 14.749] (**) fglrx(1): Textured Video is enabled.
[ 14.749] (II) fglrx(1): GLESX enableFlags = 2896
[ 14.749] (II) fglrx(1): GLESX is enabled
[ 14.813] (II) Loading extension AMDXVOPL
[ 14.813] (II) Loading extension AMDXVBA
[ 14.813] (II) fglrx(1): UVD feature is enabled(II) fglrx(1):
[ 14.815] (II) fglrx(1): Enable composite support successfully
[ 14.815] (II) fglrx(1): X context handle = 0x2
[ 14.815] (II) fglrx(1): [DRI] installation complete
[ 14.815] (==) fglrx(1): Silken mouse enabled
[ 14.815] (==) fglrx(1): Using HW cursor of display infrastructure!
[ 14.815] (II) fglrx(1): Disabling in-server RandR and enabling in-driver RandR 1.2.
[ 14.822] (II) fglrx(1): User Preference Output CRT1 using refresh rate 85.0 Hz.
[ 14.877] (--) RandR disabled
[ 14.877] (II) Initializing built-in extension Generic Event Extension
[ 14.877] (II) Initializing built-in extension SHAPE
[ 14.877] (II) Initializing built-in extension MIT-SHM
[ 14.877] (II) Initializing built-in extension XInputExtension
[ 14.877] (II) Initializing built-in extension XTEST
[ 14.877] (II) Initializing built-in extension BIG-REQUESTS
[ 14.877] (II) Initializing built-in extension SYNC
[ 14.877] (II) Initializing built-in extension XKEYBOARD
[ 14.877] (II) Initializing built-in extension XC-MISC
[ 14.877] (II) Initializing built-in extension SECURITY
[ 14.877] (II) Initializing built-in extension XINERAMA
[ 14.877] (II) Initializing built-in extension XFIXES
[ 14.877] (II) Initializing built-in extension RENDER
[ 14.877] (II) Initializing built-in extension RANDR
[ 14.877] (II) Initializing built-in extension COMPOSITE
[ 14.877] (II) Initializing built-in extension DAMAGE
[ 14.911] ukiDynamicMajor: found major device number 248
[ 14.911] ukiDynamicMajor: found major device number 248
[ 14.911] ukiOpenByBusid: Searching for BusID PCI:5:0:0
[ 14.911] ukiOpenDevice: node name is /dev/ati/card0
[ 14.911] ukiOpenDevice: open result is 21, (OK)
[ 14.911] ukiOpenByBusid: ukiOpenMinor returns 21
[ 14.911] ukiOpenByBusid: ukiGetBusid reports PCI:5:0:0
[ 14.989] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 0
[ 14.989] ukiDynamicMajor: found major device number 248
[ 14.989] ukiDynamicMajor: found major device number 248
[ 14.989] ukiOpenByBusid: Searching for BusID PCI:5:0:0
[ 14.989] ukiOpenDevice: node name is /dev/ati/card0
[ 14.989] ukiOpenDevice: open result is 24, (OK)
[ 14.989] ukiOpenByBusid: ukiOpenMinor returns 24
[ 14.989] ukiOpenByBusid: ukiGetBusid reports PCI:5:0:0
[ 15.007] (II) AIGLX: Loaded and initialized OpenGL driver(II) GLX: Initialized DRI GL provider for screen 1
[ 15.007] (II) fglrx(0): Enable the clock gating!
[ 15.007] (II) fglrx(0): Setting screen physical size to 508 x 285
[ 15.008] (II) fglrx(1): Setting screen physical size to 338 x 270
[ 15.012] (II) XKB: reuse xkmfile /var/lib/xkb/server-B20D7FC79C7F597315E3E501AEF10E0D866E8E92.xkm
[ 15.013] (II) config/udev: Adding input device Power Button (/dev/input/event1)
[ 15.013] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 15.013] (II) LoadModule: "evdev"
[ 15.013] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 15.013] (II) Module evdev: vendor="X.Org Foundation"
[ 15.013] compiled for 1.11.3, module version = 2.7.0
[ 15.013] Module class: X.Org XInput Driver
[ 15.013] ABI class: X.Org XInput driver, version 16.0
[ 15.013] (II) Using input driver 'evdev' for 'Power Button'
[ 15.013] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 15.013] (**) Power Button: always reports core events
[ 15.013] (**) evdev: Power Button: Device: "/dev/input/event1"
[ 15.013] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 15.013] (--) evdev: Power Button: Found keys
[ 15.013] (II) evdev: Power Button: Configuring as keyboard
[ 15.013] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/LNXPWRBN:00/input/input1/event1"
[ 15.013] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 6)
[ 15.013] (**) Option "xkb_rules" "evdev"
[ 15.013] (**) Option "xkb_model" "pc105"
[ 15.013] (**) Option "xkb_layout" "se"
[ 15.014] (II) XKB: reuse xkmfile /var/lib/xkb/server-523B07B557B20588EB459118C97940B7C9FF61EB.xkm
[ 15.015] (II) config/udev: Adding input device Power Button (/dev/input/event0)
[ 15.015] (**) Power Button: Applying InputClass "evdev keyboard catchall"
[ 15.015] (II) Using input driver 'evdev' for 'Power Button'
[ 15.015] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 15.015] (**) Power Button: always reports core events
[ 15.015] (**) evdev: Power Button: Device: "/dev/input/event0"
[ 15.015] (--) evdev: Power Button: Vendor 0 Product 0x1
[ 15.015] (--) evdev: Power Button: Found keys
[ 15.015] (II) evdev: Power Button: Configuring as keyboard
[ 15.015] (**) Option "config_info" "udev:/sys/devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input0/event0"
[ 15.015] (II) XINPUT: Adding extended input device "Power Button" (type: KEYBOARD, id 7)
[ 15.015] (**) Option "xkb_rules" "evdev"
[ 15.015] (**) Option "xkb_model" "pc105"
[ 15.015] (**) Option "xkb_layout" "se"
[ 15.015] (II) config/udev: Adding input device HD-Audio Generic HDMI/DP,pcm=3 (/dev/input/event9)
[ 15.015] (II) No input driver specified, ignoring this device.
[ 15.015] (II) This device may have been added with another device file.
[ 15.015] (II) config/udev: Adding input device HDA Intel PCH Rear Mic (/dev/input/event5)
[ 15.015] (II) No input driver specified, ignoring this device.
[ 15.015] (II) This device may have been added with another device file.
[ 15.015] (II) config/udev: Adding input device HDA Intel PCH Front Mic (/dev/input/event6)
[ 15.015] (II) No input driver specified, ignoring this device.
[ 15.015] (II) This device may have been added with another device file.
[ 15.015] (II) config/udev: Adding input device HDA Intel PCH Front Headphone (/dev/input/event7)
[ 15.015] (II) No input driver specified, ignoring this device.
[ 15.015] (II) This device may have been added with another device file.
[ 15.015] (II) config/udev: Adding input device HDA Intel PCH Line-Out (/dev/input/event8)
[ 15.016] (II) No input driver specified, ignoring this device.
[ 15.016] (II) This device may have been added with another device file.
[ 15.016] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/event3)
[ 15.016] (**) Logitech USB Optical Mouse: Applying InputClass "evdev pointer catchall"
[ 15.016] (II) Using input driver 'evdev' for 'Logitech USB Optical Mouse'
[ 15.016] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 15.016] (**) Logitech USB Optical Mouse: always reports core events
[ 15.016] (**) evdev: Logitech USB Optical Mouse: Device: "/dev/input/event3"
[ 15.016] (--) evdev: Logitech USB Optical Mouse: Vendor 0x46d Product 0xc05a
[ 15.016] (--) evdev: Logitech USB Optical Mouse: Found 12 mouse buttons
[ 15.016] (--) evdev: Logitech USB Optical Mouse: Found scroll wheel(s)
[ 15.016] (--) evdev: Logitech USB Optical Mouse: Found relative axes
[ 15.016] (--) evdev: Logitech USB Optical Mouse: Found x and y relative axes
[ 15.016] (II) evdev: Logitech USB Optical Mouse: Configuring as mouse
[ 15.016] (II) evdev: Logitech USB Optical Mouse: Adding scrollwheel support
[ 15.016] (**) evdev: Logitech USB Optical Mouse: YAxisMapping: buttons 4 and 5
[ 15.016] (**) evdev: Logitech USB Optical Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 15.016] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.5/2-1.5:1.0/input/input3/event3"
[ 15.016] (II) XINPUT: Adding extended input device "Logitech USB Optical Mouse" (type: MOUSE, id 8)
[ 15.016] (II) evdev: Logitech USB Optical Mouse: initialized for relative axes.
[ 15.016] (**) Logitech USB Optical Mouse: (accel) keeping acceleration scheme 1
[ 15.016] (**) Logitech USB Optical Mouse: (accel) acceleration profile 0
[ 15.016] (**) Logitech USB Optical Mouse: (accel) acceleration factor: 2.000
[ 15.016] (**) Logitech USB Optical Mouse: (accel) acceleration threshold: 4
[ 15.016] (II) config/udev: Adding input device Logitech USB Optical Mouse (/dev/input/mouse0)
[ 15.016] (II) No input driver specified, ignoring this device.
[ 15.016] (II) This device may have been added with another device file.
[ 15.016] (II) config/udev: Adding input device Dell Dell USB Entry Keyboard (/dev/input/event4)
[ 15.016] (**) Dell Dell USB Entry Keyboard: Applying InputClass "evdev keyboard catchall"
[ 15.016] (II) Using input driver 'evdev' for 'Dell Dell USB Entry Keyboard'
[ 15.016] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 15.016] (**) Dell Dell USB Entry Keyboard: always reports core events
[ 15.016] (**) evdev: Dell Dell USB Entry Keyboard: Device: "/dev/input/event4"
[ 15.016] (--) evdev: Dell Dell USB Entry Keyboard: Vendor 0x413c Product 0x2107
[ 15.016] (--) evdev: Dell Dell USB Entry Keyboard: Found keys
[ 15.016] (II) evdev: Dell Dell USB Entry Keyboard: Configuring as keyboard
[ 15.016] (**) Option "config_info" "udev:/sys/devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input4/event4"
[ 15.016] (II) XINPUT: Adding extended input device "Dell Dell USB Entry Keyboard" (type: KEYBOARD, id 9)
[ 15.016] (**) Option "xkb_rules" "evdev"
[ 15.016] (**) Option "xkb_model" "pc105"
[ 15.016] (**) Option "xkb_layout" "se"
[ 15.017] (II) config/udev: Adding input device AT Translated Set 2 keyboard (/dev/input/event2)
[ 15.017] (**) AT Translated Set 2 keyboard: Applying InputClass "evdev keyboard catchall"
[ 15.017] (II) Using input driver 'evdev' for 'AT Translated Set 2 keyboard'
[ 15.017] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 15.017] (**) AT Translated Set 2 keyboard: always reports core events
[ 15.017] (**) evdev: AT Translated Set 2 keyboard: Device: "/dev/input/event2"
[ 15.017] (--) evdev: AT Translated Set 2 keyboard: Vendor 0x1 Product 0x1
[ 15.017] (--) evdev: AT Translated Set 2 keyboard: Found keys
[ 15.017] (II) evdev: AT Translated Set 2 keyboard: Configuring as keyboard
[ 15.017] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio0/input/input2/event2"
[ 15.017] (II) XINPUT: Adding extended input device "AT Translated Set 2 keyboard" (type: KEYBOARD, id 10)
[ 15.017] (**) Option "xkb_rules" "evdev"
[ 15.017] (**) Option "xkb_model" "pc105"
[ 15.017] (**) Option "xkb_layout" "se"
[ 15.042] (II) fglrx(0): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 15.044] (II) fglrx(1): Restoring Recent Mode via PCS is not supported in RANDR 1.2 capable environments
[ 15.298] (II) fglrx(0): EDID vendor "DEL", prod id 41087
[ 15.298] (II) fglrx(0): Using hsync ranges from config file
[ 15.298] (II) fglrx(0): Using vrefresh ranges from config file
[ 15.298] (II) fglrx(0): Printing DDC gathered Modelines:
[ 15.298] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 15.298] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 15.298] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 15.298] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 15.298] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 15.298] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 15.298] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 15.298] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 15.298] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 15.298] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 15.298] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 15.298] (II) fglrx(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[ 17.382] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/mouse1)
[ 17.382] (II) No input driver specified, ignoring this device.
[ 17.382] (II) This device may have been added with another device file.
[ 17.382] (II) config/udev: Adding input device PS/2 Generic Mouse (/dev/input/event10)
[ 17.382] (**) PS/2 Generic Mouse: Applying InputClass "evdev pointer catchall"
[ 17.382] (II) Using input driver 'evdev' for 'PS/2 Generic Mouse'
[ 17.382] (II) Loading /usr/lib/xorg/modules/input/evdev_drv.so
[ 17.382] (**) PS/2 Generic Mouse: always reports core events
[ 17.382] (**) evdev: PS/2 Generic Mouse: Device: "/dev/input/event10"
[ 17.382] (--) evdev: PS/2 Generic Mouse: Vendor 0x2 Product 0x1
[ 17.382] (--) evdev: PS/2 Generic Mouse: Found 3 mouse buttons
[ 17.382] (--) evdev: PS/2 Generic Mouse: Found relative axes
[ 17.382] (--) evdev: PS/2 Generic Mouse: Found x and y relative axes
[ 17.382] (II) evdev: PS/2 Generic Mouse: Configuring as mouse
[ 17.382] (**) evdev: PS/2 Generic Mouse: YAxisMapping: buttons 4 and 5
[ 17.382] (**) evdev: PS/2 Generic Mouse: EmulateWheelButton: 4, EmulateWheelInertia: 10, EmulateWheelTimeout: 200
[ 17.382] (**) Option "config_info" "udev:/sys/devices/platform/i8042/serio1/input/input10/event10"
[ 17.382] (II) XINPUT: Adding extended input device "PS/2 Generic Mouse" (type: MOUSE, id 11)
[ 17.382] (II) evdev: PS/2 Generic Mouse: initialized for relative axes.
[ 17.382] (**) PS/2 Generic Mouse: (accel) keeping acceleration scheme 1
[ 17.382] (**) PS/2 Generic Mouse: (accel) acceleration profile 0
[ 17.382] (**) PS/2 Generic Mouse: (accel) acceleration factor: 2.000
[ 17.382] (**) PS/2 Generic Mouse: (accel) acceleration threshold: 4
[ 17.777] (II) fglrx(0): EDID vendor "DEL", prod id 41087
[ 17.777] (II) fglrx(0): Using hsync ranges from config file
[ 17.777] (II) fglrx(0): Using vrefresh ranges from config file
[ 17.777] (II) fglrx(0): Printing DDC gathered Modelines:
[ 17.777] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 17.777] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 17.777] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 17.777] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 17.777] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 17.777] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 17.777] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 17.777] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 17.777] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 17.777] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 17.777] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 17.777] (II) fglrx(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[ 19.827] (II) fglrx(0): EDID vendor "DEL", prod id 41087
[ 19.827] (II) fglrx(0): Using hsync ranges from config file
[ 19.827] (II) fglrx(0): Using vrefresh ranges from config file
[ 19.827] (II) fglrx(0): Printing DDC gathered Modelines:
[ 19.827] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 19.827] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 19.827] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 19.827] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 19.827] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 19.827] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 19.827] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 19.827] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 19.827] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 19.827] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 19.827] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 19.827] (II) fglrx(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[ 19.886] (II) fglrx(0): EDID vendor "DEL", prod id 41087
[ 19.886] (II) fglrx(0): Using hsync ranges from config file
[ 19.886] (II) fglrx(0): Using vrefresh ranges from config file
[ 19.886] (II) fglrx(0): Printing DDC gathered Modelines:
[ 19.886] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 19.886] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 19.886] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 19.886] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 19.886] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 19.886] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 19.886] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 19.886] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 19.886] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 19.886] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 19.886] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 19.886] (II) fglrx(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[ 19.979] (II) XKB: reuse xkmfile /var/lib/xkb/server-D6886E068F2CB064ECF3761690C15F1296C71014.xkm
[ 40.410] (II) fglrx(0): EDID vendor "DEL", prod id 41087
[ 40.410] (II) fglrx(0): Using hsync ranges from config file
[ 40.410] (II) fglrx(0): Using vrefresh ranges from config file
[ 40.410] (II) fglrx(0): Printing DDC gathered Modelines:
[ 40.410] (II) fglrx(0): Modeline "1920x1080"x0.0 148.50 1920 2008 2052 2200 1080 1084 1089 1125 +hsync +vsync (67.5 kHz)
[ 40.410] (II) fglrx(0): Modeline "800x600"x0.0 40.00 800 840 968 1056 600 601 605 628 +hsync +vsync (37.9 kHz)
[ 40.410] (II) fglrx(0): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 40.410] (II) fglrx(0): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 40.410] (II) fglrx(0): Modeline "720x400"x0.0 28.32 720 738 846 900 400 412 414 449 -hsync +vsync (31.5 kHz)
[ 40.410] (II) fglrx(0): Modeline "1280x1024"x0.0 135.00 1280 1296 1440 1688 1024 1025 1028 1066 +hsync +vsync (80.0 kHz)
[ 40.410] (II) fglrx(0): Modeline "1024x768"x0.0 78.75 1024 1040 1136 1312 768 769 772 800 +hsync +vsync (60.0 kHz)
[ 40.410] (II) fglrx(0): Modeline "1024x768"x0.0 65.00 1024 1048 1184 1344 768 771 777 806 -hsync -vsync (48.4 kHz)
[ 40.410] (II) fglrx(0): Modeline "800x600"x0.0 49.50 800 816 896 1056 600 601 604 625 +hsync +vsync (46.9 kHz)
[ 40.410] (II) fglrx(0): Modeline "1152x864"x0.0 108.00 1152 1216 1344 1600 864 865 868 900 +hsync +vsync (67.5 kHz)
[ 40.410] (II) fglrx(0): Modeline "1280x1024"x0.0 108.00 1280 1328 1440 1688 1024 1025 1028 1066 +hsync +vsync (64.0 kHz)
[ 40.410] (II) fglrx(0): Modeline "1920x1080"x60.0 172.80 1920 2040 2248 2576 1080 1081 1084 1118 -hsync +vsync (67.1 kHz)
[ 40.440] (II) fglrx(1): EDID vendor "AOC", prod id 43413
[ 40.440] (II) fglrx(1): Using EDID range info for horizontal sync
[ 40.440] (II) fglrx(1): Using EDID range info for vertical refresh
[ 40.440] (II) fglrx(1): Printing DDC gathered Modelines:
[ 40.440] (II) fglrx(1): Modeline "1280x1024"x0.0 157.50 1280 1344 1504 1728 1024 1025 1028 1072 +hsync +vsync (91.1 kHz)
[ 40.440] (II) fglrx(1): Modeline "640x480"x0.0 31.50 640 656 720 840 480 481 484 500 -hsync -vsync (37.5 kHz)
[ 40.440] (II) fglrx(1): Modeline "640x480"x0.0 25.18 640 656 752 800 480 490 492 525 -hsync -vsync (31.5 kHz)
[ 40.440<br/><br/>(Message over 64 KB, truncated)